Planning your bi-fold or patio doors in Erdington
Work like this in Erdington rarely needs planning permission, but parts of the job must meet Building Regulations — certified electrical work, ventilation or energy-efficiency standards, for example. Your quote shows how each part is signed off. If planning does come into it, say for a listed building, Birmingham City Council is the authority.
- If a new beam bears on a wall you share with a neighbour, the Party Wall etc. Act 1996 may apply.
- Widening an opening needs a structural engineer's design and building control approval.
- Bi-fold and patio doors must meet a U-value of 1.4 W/m²K or an equivalent energy rating.
- Postcode district
- B24
- Planning and building control
- Birmingham City Council
- From our West Bromwich base
- 8 miles
Options to consider in Erdington
Widening an opening
Turning a window into doors, or making an opening wider, means cutting the wall and fitting a new lintel or steel beam sized by a structural engineer. Building control must approve the structural work. We organise the calculations, temporary supports, steel and making good, and show these costs on their own lines in your quote.
Sliding patio doors
Two or more large panels slide past each other on a track, so nothing swings into the room or onto the patio. Sliders give the biggest uninterrupted panes and the narrowest frames, which makes them a good choice where the view matters more than opening the whole wall. Aluminium sliders also suit wide openings.
Bi-fold and patio doors prices in Erdington
Expect to budget between £1,200 and £8,500 per doorset in Erdington. Three-panel aluminium bi-fold, about 2.4 m wide, in an existing opening: typically £3,200–£4,800 per doorset.
| Option | Guide price | Good to know |
|---|---|---|
| uPVC French or sliding doors | £1,200 – £2,400 per doorset | Openings up to about 1.8 m |
| Three-panel aluminium bi-fold | £3,000 – £5,000 per doorset | Openings of about 2.4–3 m |
| Four- or five-panel aluminium bi-fold | £4,800 – £8,500 per doorset | Openings of about 3.6–4.8 m |
Guide ranges include VAT where it applies. A free survey turns this guide into a fixed, itemised price.
Before you book in Erdington
How long does fitting take?
Fitting doors into a ready opening usually takes one to two days. If we're widening the opening, allow another two to four days for propping, cutting, fitting the beam, inspection and making good. Manufacture usually takes four to eight weeks after the design is signed off, depending on the material and colour.
Which postcodes in Erdington do you work in?
We cover B24 and the streets around them. If you're on the edge of Erdington, neighbouring Castle Vale and Walmley are covered too.
What should I check before ordering?
Think about the floor level inside and out: a flush threshold needs the patio set lower, with drainage at the door. Decide which side the panels should stack and where the everyday traffic door goes, keeping furniture in mind. If the doors face south or west, ask about solar control glass to keep the room cooler.
Who approves bi-fold and patio doors in Erdington?
You won't usually need planning permission, but the work must meet Building Regulations. Building control in Erdington is provided by Birmingham City Council or a registered building control approver, and some work is self-certified by registered installers.
Bi-fold and patio doors near Erdington
- Bi-fold and patio doors in Castle Vale
- Bi-fold and patio doors in Walmley
- Bi-fold and patio doors in Sutton Coldfield
- Bi-fold and patio doors in Castle Bromwich
Other work we do in Erdington
- Pitched roofing in Erdington
- Porches in Erdington
- uPVC windows in Erdington
- Driveways in Erdington
- Loft conversions in Erdington
- Garage conversions in Erdington
Not sure whether bi-folds or sliders suit your room? We'll talk it through on site in Erdington, with no obligation.
