Planning your bi-fold or patio doors in Nuneaton
This kind of work rarely needs planning permission, but it does have to comply with Building Regulations, and some parts must be certified by a registered installer or signed off by building control. In Nuneaton, building control is provided by Nuneaton and Bedworth Borough Council or a registered building control approver (formerly an approved inspector).
- Glass in a door must be safety glass up to 1,500 mm above the floor.
- Bi-fold and patio doors must meet a U-value of 1.4 W/m²K or an equivalent energy rating.
- Sliding doors never swing into the room, which helps in a kitchen where space is tight.
- Postcode district
- CV11
- Planning and building control
- Nuneaton and Bedworth Borough Council
- From our West Bromwich base
- 22 miles
Choices to weigh up in Nuneaton
Widening an opening
Turning a window into doors, or making an opening wider, means cutting the wall and fitting a new lintel or steel beam sized by a structural engineer. Building control must approve the structural work. We organise the calculations, temporary supports, steel and making good, and show these costs on their own lines in your quote.
uPVC bi-fold doors
uPVC bi-folds cost less than aluminium and insulate well, but the frames are chunkier and the maximum panel size is smaller. They work best on openings up to about three metres wide. White, grey and woodgrain finishes are available, and they can be matched to existing uPVC windows on the same wall.
How much should you budget in Nuneaton?
Guide prices start at £1,200 and run to £8,500 per doorset. Three-panel aluminium bi-fold, about 2.4 m wide, in an existing opening: around £3,200–£4,800 per doorset.
| Option | Guide price | Good to know |
|---|---|---|
| uPVC French or sliding doors | £1,200 – £2,400 per doorset | Openings up to about 1.8 m |
| Three-panel aluminium bi-fold | £3,000 – £5,000 per doorset | Openings of about 2.4–3 m |
| Four- or five-panel aluminium bi-fold | £4,800 – £8,500 per doorset | Openings of about 3.6–4.8 m |
Guide ranges include VAT where it applies. Access, parking and the state of what's there now can move the price — the survey settles it.
Questions about bi-fold and patio doors in Nuneaton
Which is better, bi-fold or sliding doors?
It depends on how you use the space. Bi-folds open almost the whole width, which suits summer living and wide openings onto a patio. Sliders have fewer, larger panes and slimmer frames, so they give a better view when closed and never take up room when open. Sliders are often the better pick where the doors stay shut for most of the year.
Which postcodes in Nuneaton do you work in?
We cover CV11 and the streets around them. If you're on the edge of Nuneaton, neighbouring Bedworth and Atherstone are covered too.
How long does fitting take?
Fitting doors into a ready opening usually takes one to two days. If we're widening the opening, allow another two to four days for propping, cutting, fitting the beam, inspection and making good. Manufacture usually takes four to eight weeks after the design is signed off, depending on the material and colour.
Will I need permission from the council in Nuneaton?
You won't usually need planning permission, but the work must meet Building Regulations. Building control in Nuneaton is provided by Nuneaton and Bedworth Borough Council or a registered building control approver, and some work is self-certified by registered installers.
Close to Nuneaton
- Bi-fold and patio doors in Bedworth
- Bi-fold and patio doors in Atherstone
- Bi-fold and patio doors in Walsgrave
- Bi-fold and patio doors in Wyken
Other work we do in Nuneaton
- Fascias, soffits and guttering in Nuneaton
- Composite doors in Nuneaton
- Porches in Nuneaton
- Bathroom fitting in Nuneaton
- Kitchen fitting in Nuneaton
- Loft conversions in Nuneaton
Send your address in Nuneaton to sales@skjhomeimprovements.co.uk and we'll book a door survey at a time that suits you.
