What should you know before starting in Oldbury?
Live in a conservation area or a listed building in Oldbury? Check with Sandwell Council before changing the outside of your home. Otherwise the main rules for your bi-fold or patio doors are Building Regulations, and we'll explain at the survey which certificates you'll receive.
- Widening an opening needs a structural engineer's design and building control approval.
- Sliding doors never swing into the room, which helps in a kitchen where space is tight.
- If a new beam bears on a wall you share with a neighbour, the Party Wall etc. Act 1996 may apply.
- Postcode districts
- B67, B68, B69
- Planning and building control
- Sandwell Council
- From our West Bromwich base
- 2 miles
Which options suit homes in Oldbury?
Aluminium bi-fold doors
Slim, strong aluminium frames carry large glass panels and are made with a thermal break to meet energy rules. Three to six panels are typical, with a traffic door for everyday use so you don't open the whole set. They come powder-coated in almost any colour and suit kitchens and new extensions.
Widening an opening
Turning a window into doors, or making an opening wider, means cutting the wall and fitting a new lintel or steel beam sized by a structural engineer. Building control must approve the structural work. We organise the calculations, temporary supports, steel and making good, and show these costs on their own lines in your quote.
How much should you budget in Oldbury?
Guide prices start at £1,200 and run to £8,500 per doorset. Three-panel aluminium bi-fold, about 2.4 m wide, in an existing opening: around £3,200–£4,800 per doorset.
| Option | Guide price | Good to know |
|---|---|---|
| uPVC French or sliding doors | £1,200 – £2,400 per doorset | Openings up to about 1.8 m |
| Three-panel aluminium bi-fold | £3,000 – £5,000 per doorset | Openings of about 2.4–3 m |
| Four- or five-panel aluminium bi-fold | £4,800 – £8,500 per doorset | Openings of about 3.6–4.8 m |
Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Oldbury address.
Questions about bi-fold and patio doors in Oldbury
What should I check before ordering?
Think about the floor level inside and out: a flush threshold needs the patio set lower, with drainage at the door. Decide which side the panels should stack and where the everyday traffic door goes, keeping furniture in mind. If the doors face south or west, ask about solar control glass to keep the room cooler.
Which postcodes in Oldbury do you work in?
We cover B67, B68, B69 and the streets around them. If you're on the edge of Oldbury, neighbouring West Bromwich and Rowley Regis are covered too.
How long does fitting take?
Fitting doors into a ready opening usually takes one to two days. If we're widening the opening, allow another two to four days for propping, cutting, fitting the beam, inspection and making good. Manufacture usually takes four to eight weeks after the design is signed off, depending on the material and colour.
Will I need permission from the council in Oldbury?
You won't usually need planning permission, but the work must meet Building Regulations. Building control in Oldbury is provided by Sandwell Council or a registered building control approver, and some work is self-certified by registered installers.
Also covering nearby
- Bi-fold and patio doors in West Bromwich
- Bi-fold and patio doors in Rowley Regis
- Bi-fold and patio doors in Tividale
- Bi-fold and patio doors in Smethwick
Other home improvements in Oldbury
- Fascias, soffits and guttering in Oldbury
- Porches in Oldbury
- Conservatories in Oldbury
- Fencing and gates in Oldbury
- Kitchen makeovers in Oldbury
- House renovations in Oldbury
Phone 0800 088 6248 to arrange a visit in Oldbury, with the doors and any structural work priced on separate lines.
