Bi-fold and patio doors in Streetly

What should you know before starting in Streetly?

Work like this in Streetly rarely needs planning permission, but parts of the job must meet Building Regulations — certified electrical work, ventilation or energy-efficiency standards, for example. Your quote shows how each part is signed off. If planning does come into it, say for a listed building, Walsall Council is the authority.

With a traffic door on a bi-fold set, you don't have to open every panel to step outside.
Sliding doors never swing into the room, which helps in a kitchen where space is tight.
A flush threshold needs the outside ground set lower, with drainage in front of the door.

Postcode district: B74
Planning and building control: Walsall Council
From our West Bromwich base: 6 miles

Which option fits your home?

uPVC bi-fold doors

uPVC bi-folds cost less than aluminium and insulate well, but the frames are chunkier and the maximum panel size is smaller. They work best on openings up to about three metres wide. White, grey and woodgrain finishes are available, and they can be matched to existing uPVC windows on the same wall.

Widening an opening

Turning a window into doors, or making an opening wider, means cutting the wall and fitting a new lintel or steel beam sized by a structural engineer. Building control must approve the structural work. We organise the calculations, temporary supports, steel and making good, and show these costs on their own lines in your quote.

What does your bi-fold or patio doors cost in Streetly?

Guide prices start at £1,200 and run to £8,500 per doorset. Three-panel aluminium bi-fold, about 2.4 m wide, in an existing opening: around £3,200–£4,800 per doorset.

Guide prices for bi-fold and patio doors
Option	Guide price	Good to know
uPVC French or sliding doors	£1,200 – £2,400 per doorset	Openings up to about 1.8 m
Three-panel aluminium bi-fold	£3,000 – £5,000 per doorset	Openings of about 2.4–3 m
Four- or five-panel aluminium bi-fold	£4,800 – £8,500 per doorset	Openings of about 3.6–4.8 m

Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Streetly address.

Bi-fold and patio doors in Streetly: common questions

How long does fitting take?

Fitting doors into a ready opening usually takes one to two days. If we're widening the opening, allow another two to four days for propping, cutting, fitting the beam, inspection and making good. Manufacture usually takes four to eight weeks after the design is signed off, depending on the material and colour.

Do you cover Streetly?

Yes. Streetly (B74) is about 6 miles from our West Bromwich base and inside the area we cover. Call 0800 088 6248 or send the form on this page to book a free survey.

How much mess is involved?

A straight swap creates some dust around the opening, so we sheet the floor and protect nearby units. Widening an opening is messier: there's brick and plaster dust, temporary props in the room and a few days of disruption. We seal off the work area as far as practical and clear up at the end of each day.

Does Walsall Council need to approve my bi-fold or patio doors?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Streetly is provided by Walsall Council or a registered building control approver, and some work is self-certified by registered installers.

Also covering nearby

Other home improvements in Streetly

Send your address in Streetly to sales@skjhomeimprovements.co.uk and we'll book a door survey at a time that suits you.