Bi-fold and patio doors in Worcestershire

Before your bi-fold or patio doors in Worcestershire

Work like this in Worcestershire rarely needs planning permission, but parts of the job must meet Building Regulations — certified electrical work, ventilation or energy-efficiency standards, for example. Your quote shows how each part is signed off. If planning does come into it, say for a listed building, the district or borough council for your town is the authority.

Glass in a door must be safety glass up to 1,500 mm above the floor.
Bi-fold and patio doors must meet a U-value of 1.4 W/m²K or an equivalent energy rating.
Widening an opening needs a structural engineer's design and building control approval.

Postcode district: All Worcestershire postcodes
Planning and building control: Your district council
From our West Bromwich base: About 14 miles to the centre

Options to consider in Worcestershire

French doors

A pair of hinged doors that open outwards or inwards, sometimes with fixed side panels. French doors suit narrower openings and older houses. They're the simplest and most affordable way to replace an old single back door, or to turn a window into a wider opening onto a patio.

Aluminium bi-fold doors

Slim, strong aluminium frames carry large glass panels and are made with a thermal break to meet energy rules. Three to six panels are typical, with a traffic door for everyday use so you don't open the whole set. They come powder-coated in almost any colour and suit kitchens and new extensions.

How much should you budget in Worcestershire?

Prices in Worcestershire match the rest of our area: £1,200–£8,500 per doorset. Three-panel aluminium bi-fold, about 2.4 m wide, in an existing opening: usually £3,200–£4,800 per doorset.

Guide prices for bi-fold and patio doors
Option	Guide price	Good to know
uPVC French or sliding doors	£1,200 – £2,400 per doorset	Openings up to about 1.8 m
Three-panel aluminium bi-fold	£3,000 – £5,000 per doorset	Openings of about 2.4–3 m
Four- or five-panel aluminium bi-fold	£4,800 – £8,500 per doorset	Openings of about 3.6–4.8 m

Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Worcestershire address.

Before you book in Worcestershire

How much do bi-fold doors cost?

A three-panel aluminium bi-fold for an opening of around 2.4 m typically costs £3,000–£5,000 fitted in the West Midlands, and wider four- or five-panel sets run to around £8,500. uPVC versions cost less. If the opening needs widening, add the cost of a steel beam, calculations and building control, which we price separately in your quote.

Do you cover the whole of Worcestershire?

Yes — we cover Worcestershire from our West Bromwich base, including Dudley, Sandwell and Wolverhampton. Call 0800 088 6248 or send the form on this page to book a free survey.

How much mess is involved?

A straight swap creates some dust around the opening, so we sheet the floor and protect nearby units. Widening an opening is messier: there's brick and plaster dust, temporary props in the room and a few days of disruption. We seal off the work area as far as practical and clear up at the end of each day.

Who approves bi-fold and patio doors in Worcestershire?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Worcestershire is provided by the district or borough council for your town or a registered building control approver, and some work is self-certified by registered installers.

Bi-fold and patio doors across Worcestershire

We cover every town and district below:

Nearby places we cover

Other home improvements in Worcestershire

Get the opening measured and the lintel checked: book a free survey in Worcestershire and we'll put it all in a written quote.