What should you know before starting in Bedworth?
This kind of work rarely needs planning permission, but it does have to comply with Building Regulations, and some parts must be certified by a registered installer or signed off by building control. In Bedworth, building control is provided by Nuneaton and Bedworth Borough Council or a registered building control approver (formerly an approved inspector).
- Siting the en-suite close to the existing soil stack is usually the simplest and most reliable layout.
- New circuits, and changes to circuits near the shower, are notifiable electrical work under Part P.
- Cutting a doorway through a load-bearing wall needs a properly sized lintel and Building Regulations approval.
- Postcode district
- CV12
- Planning and building control
- Nuneaton and Bedworth Borough Council
- From our West Bromwich base
- 22 miles
Options to consider in Bedworth
Refit of an existing en-suite
Stripping out an old en-suite and fitting a larger low-profile tray, a better shower, wall-hung furniture and good lighting can make a small room much more usable. Using the existing water and waste positions keeps costs down, and replacing old tray seals and grout lines removes common sources of leaks.
New en-suite in the main bedroom
A stud wall is built across part of the bedroom, usually along the wall nearest the soil stack, to create a shower room. Insulating the new wall helps keep noise down. A pocket door saves the space a swinging door needs, and a window or roof light inside the en-suite is a bonus, though not essential if extraction is right.
What does your en-suite cost in Bedworth?
Expect to budget between £3,800 and £15,000 depending on size and specification in Bedworth. A new 1.5 m × 2.2 m shower en-suite formed in a double bedroom near the soil stack: typically £7,000–£9,500.
| Option | Guide price | Good to know |
|---|---|---|
| Refit of an existing en-suite | £3,800 – £6,000 | Same layout, new suite, tiles and shower |
| New en-suite near the soil stack | £6,500 – £10,500 | Stud walls and a gravity waste |
| New en-suite with a long waste run or pumped drainage | £10,000 – £15,000 | Far side of the house, loft, or box-room conversion |
Guide ranges include VAT where it applies. We confirm a fixed price for the agreed specification after visiting.
Questions about en-suite bathrooms in Bedworth
Is there enough room for an en-suite in my bedroom?
A compact shower en-suite needs roughly 1.5 m × 2 m, and less with a corner shower and a wall-hung basin. The bigger question is drainage: an en-suite near the soil stack is simple, while one on the far side of the house may need a longer waste run or a pumped system. We measure and check the waste route at the survey before suggesting a layout.
How do I book a survey in Bedworth?
Send the form on this page, use the guide-price tool or call 0800 088 6248 free. We'll ask a few questions about your en-suite and arrange a time to visit.
How much does an en-suite cost?
In the West Midlands, en-suites typically cost £3,800–£15,000, including VAT where it applies. Refitting an existing en-suite usually costs £3,800–£6,000. A new 1.5 m × 2.2 m shower en-suite formed in a double bedroom near the soil stack typically costs £7,000–£9,500, including walls, waste, electrics, tiling and the suite. Long waste runs or pumped drainage push the price higher.
Who approves en-suite bathrooms in Bedworth?
You won't usually need planning permission, but the work must meet Building Regulations. Building control in Bedworth is provided by Nuneaton and Bedworth Borough Council or a registered building control approver, and some work is self-certified by registered installers.
Also covering nearby
- En-suite bathrooms in Nuneaton
- En-suite bathrooms in Walsgrave
- En-suite bathrooms in Wyken
- En-suite bathrooms in Allesley
More services in Bedworth
- Wet rooms in Bedworth
- Kitchen fitting in Bedworth
- Kitchen makeovers in Bedworth
- uPVC windows in Bedworth
- Conservatories in Bedworth
- Double-storey extensions in Bedworth
Get a guide price for a new or refitted en-suite in Bedworth, then a fixed price for the agreed specification.
