Planning your fence or gate in Castle Vale
Before replacing a boundary fence in Castle Vale, confirm who owns it — your deeds often show this — and agree the line with your neighbour. Planning permission from Birmingham City Council is only needed above 2 m, or above 1 m beside a road.
- Driveway gates should open inwards, not out over the pavement.
- Elsewhere in the garden, fences and gates can be up to 2 m high under permitted development.
- Adding trellis on top? Treat it as part of the fence height when checking the limits.
- Postcode district
- B35
- Planning and building control
- Birmingham City Council
- From our West Bromwich base
- 9 miles
Options to consider in Castle Vale
Slatted and composite fencing
Horizontal slatted timber gives a modern look and lets some air and light through, which suits contemporary gardens. Composite fencing, made from wood fibre and plastic, doesn't need painting or treating and won't rot. Both cost more than standard fences, and composite systems have their own posts and fixings.
Closeboard fencing
Vertical featheredge boards nailed to horizontal rails fixed between posts, built in place along the boundary. Closeboard is stronger than panels, copes better with wind and can follow sloping ground more neatly. Damaged boards can be replaced one at a time. It costs more and takes longer to build, but it lasts longer in most gardens.
Guide prices for Castle Vale
Prices in Castle Vale match the rest of our area: £60–£230 per linear metre. 1.8 m closeboard fence with concrete posts and gravel boards, old fence removed: usually £95–£135 per linear metre.
| Option | Guide price | Good to know |
|---|---|---|
| Panel fencing with concrete posts | £60 – £95 per linear metre | 1.8 m panels, quick to fit |
| Closeboard with concrete posts | £90 – £135 per linear metre | Stronger, better in exposed gardens |
| Slatted or composite fencing | £140 – £230 per linear metre | Contemporary look, less upkeep |
Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Castle Vale address.
Before you book in Castle Vale
How much does a new fence cost?
In the West Midlands, panel fencing with concrete posts usually costs around £60–£95 per metre fitted, and closeboard with concrete posts around £90–£135 per metre, including removal of the old fence. A 20 m run of closeboard therefore typically costs about £1,900–£2,700. Side gates usually add £200–£550 each, and driveway gates more.
Which postcodes in Castle Vale do you work in?
We cover B35 and the streets around them. If you're on the edge of Castle Vale, neighbouring Castle Bromwich and Erdington are covered too.
What should I do before the fence goes up?
Clear plants, pots and sheds back from the boundary by about a metre if you can, and lift anything you want to keep. Talk to your neighbour about access and the work. If you know where drains, cables or pipes run near the boundary, tell us at survey.
Will I need permission from the council in Castle Vale?
Not for a fence or gate up to 2 m high, or 1 m beside a road used by vehicles. Above those heights, or around a listed building, check with Birmingham City Council.
Also covering nearby
- Fencing and gates in Castle Bromwich
- Fencing and gates in Erdington
- Fencing and gates in Walmley
- Fencing and gates in Water Orton
Other work we do in Castle Vale
- Patios in Castle Vale
- Rendering in Castle Vale
- Driveways in Castle Vale
- En-suite bathrooms in Castle Vale
- Composite doors in Castle Vale
- uPVC windows in Castle Vale
Fence down after a storm? Call 0800 088 6248 and we'll come and measure your boundaries in Castle Vale.
