Fencing and gates in Rushall: approvals and local details
Before replacing a boundary fence in Rushall, confirm who owns it — your deeds often show this — and agree the line with your neighbour. Planning permission from Walsall Council is only needed above 2 m, or above 1 m beside a road.
- Your title plan may show who is responsible for each boundary.
- Elsewhere in the garden, fences and gates can be up to 2 m high under permitted development.
- Concrete posts and gravel boards don't rot at ground level.
- Postcode district
- WS4
- Planning and building control
- Walsall Council
- From our West Bromwich base
- 6 miles
Which options suit homes in Rushall?
Concrete posts and gravel boards
Slotted concrete posts hold panels in place without rotting, and concrete gravel boards along the bottom keep timber clear of wet soil. Concrete posts are heavier to install and more noticeable than timber. Many people put them in when replacing panel fences, because new panels can then be slotted in later without disturbing the posts.
Panel fencing
Pre-made timber panels, usually 1.83 m wide, slotted between posts. Lap, overlap and slatted panels are quick to fit and the most affordable option. They suit sheltered gardens best. In exposed spots, lightweight panels can rattle or blow out, so heavier panels or closeboard are a better choice there.
How much should you budget in Rushall?
Guide prices start at £60 and run to £230 per linear metre. 1.8 m closeboard fence with concrete posts and gravel boards, old fence removed: around £95–£135 per linear metre.
| Option | Guide price | Good to know |
|---|---|---|
| Panel fencing with concrete posts | £60 – £95 per linear metre | 1.8 m panels, quick to fit |
| Closeboard with concrete posts | £90 – £135 per linear metre | Stronger, better in exposed gardens |
| Slatted or composite fencing | £140 – £230 per linear metre | Contemporary look, less upkeep |
Guide ranges include VAT where it applies. A free survey turns this guide into a fixed, itemised price.
Your questions answered
How much does a new fence cost?
In the West Midlands, panel fencing with concrete posts usually costs around £60–£95 per metre fitted, and closeboard with concrete posts around £90–£135 per metre, including removal of the old fence. A 20 m run of closeboard therefore typically costs about £1,900–£2,700. Side gates usually add £200–£550 each, and driveway gates more.
Which postcodes in Rushall do you work in?
We cover WS4 and the streets around them. If you're on the edge of Rushall, neighbouring Aldridge and Walsall Wood are covered too.
What should I do before the fence goes up?
Clear plants, pots and sheds back from the boundary by about a metre if you can, and lift anything you want to keep. Talk to your neighbour about access and the work. If you know where drains, cables or pipes run near the boundary, tell us at survey.
Who approves fencing and gates in Rushall?
Not for a fence or gate up to 2 m high, or 1 m beside a road used by vehicles. Above those heights, or around a listed building, check with Walsall Council.
Also covering nearby
- Fencing and gates in Aldridge
- Fencing and gates in Walsall Wood
- Fencing and gates in Pelsall
- Fencing and gates in Brownhills
Other home improvements in Rushall
- Rendering in Rushall
- Driveways in Rushall
- Plastering in Rushall
- Porches in Rushall
- Single-storey extensions in Rushall
- En-suite bathrooms in Rushall
Fence down after a storm? Call 0800 088 6248 and we'll come and measure your boundaries in Rushall.
