Before your fence or gate in Tile Hill
Fences and gates up to 2 metres high don't usually need planning permission in Tile Hill; next to a road used by vehicles the limit is 1 metre. Above those heights, or around a listed building, check with Coventry City Council first.
- Your title plan may show who is responsible for each boundary.
- Elsewhere in the garden, fences and gates can be up to 2 m high under permitted development.
- The Party Wall etc. Act 1996 doesn't cover timber fences, only masonry boundary walls.
- Postcode district
- CV4
- Planning and building control
- Coventry City Council
- From our West Bromwich base
- 19 miles
Choices to weigh up in Tile Hill
Slatted and composite fencing
Horizontal slatted timber gives a modern look and lets some air and light through, which suits contemporary gardens. Composite fencing, made from wood fibre and plastic, doesn't need painting or treating and won't rot. Both cost more than standard fences, and composite systems have their own posts and fixings.
Concrete posts and gravel boards
Slotted concrete posts hold panels in place without rotting, and concrete gravel boards along the bottom keep timber clear of wet soil. Concrete posts are heavier to install and more noticeable than timber. Many people put them in when replacing panel fences, because new panels can then be slotted in later without disturbing the posts.
What does your fence or gate cost in Tile Hill?
Prices in Tile Hill match the rest of our area: £60–£230 per linear metre. 1.8 m closeboard fence with concrete posts and gravel boards, old fence removed: usually £95–£135 per linear metre.
| Option | Guide price | Good to know |
|---|---|---|
| Panel fencing with concrete posts | £60 – £95 per linear metre | 1.8 m panels, quick to fit |
| Closeboard with concrete posts | £90 – £135 per linear metre | Stronger, better in exposed gardens |
| Slatted or composite fencing | £140 – £230 per linear metre | Contemporary look, less upkeep |
Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Tile Hill address.
Fencing and gates in Tile Hill: common questions
How much does a new fence cost?
In the West Midlands, panel fencing with concrete posts usually costs around £60–£95 per metre fitted, and closeboard with concrete posts around £90–£135 per metre, including removal of the old fence. A 20 m run of closeboard therefore typically costs about £1,900–£2,700. Side gates usually add £200–£550 each, and driveway gates more.
How do I book a survey in Tile Hill?
Send the form on this page, use the guide-price tool or call 0800 088 6248 free. We'll ask a few questions about your fence or gate and arrange a time to visit.
Do I need to tell my neighbour about a new fence?
It's not usually a legal requirement for a fence on your own land, but it's good practice and avoids disputes. If the fence is shared or ownership is unclear, agree the work in writing first. We may need access to their side for a short time, so a quick conversation before we start helps.
Does Coventry City Council need to approve my fence or gate?
Not for a fence or gate up to 2 m high, or 1 m beside a road used by vehicles. Above those heights, or around a listed building, check with Coventry City Council.
Also covering nearby
- Fencing and gates in Allesley
- Fencing and gates in Earlsdon
- Fencing and gates in Balsall Common
- Fencing and gates in Meriden
More services in Tile Hill
- Patios in Tile Hill
- Painting and decorating in Tile Hill
- Driveways in Tile Hill
- Kitchen makeovers in Tile Hill
- Composite doors in Tile Hill
- Single-storey extensions in Tile Hill
Your free fencing survey in Tile Hill ends with an itemised quote, with every gate priced on its own line.