Knock-through walls in Staffordshire

What should you know before starting in Staffordshire?

There's no planning application for internal work in Staffordshire, but Building Regulations still apply to structural changes, electrics, drainage and fire safety. We tell you at the survey which parts need approval or certification.

Steel beams usually take one to two weeks to make once the calculations are approved.
Removing a load-bearing wall needs a structural engineer's calculations and Building Regulations approval.
Keep the completion certificate and engineer's calculations safe, as a buyer's solicitor will ask for them.

Postcode district: All Staffordshire postcodes
Planning and building control: Your district council
From our West Bromwich base: About 11 miles to the centre

Options to consider in Staffordshire

Wide opening instead of full removal

Keeping short sections of wall at each end, or a bulkhead above, lets you open two rooms up while keeping some separation and somewhere to put furniture. It can mean a shorter, lighter steel, and it sometimes gives a better result where the two floors are at slightly different levels or the ceilings don't line up.

Kitchen into dining room

A very common knock-through in older houses, creating one sociable room for cooking and eating. It often goes alongside a new kitchen, so the steel position, lighting and sockets are planned with the kitchen layout in mind. Radiators and doors may move to make the most of the longer wall space.

What does your knock-through cost in Staffordshire?

Guide prices start at £1,200 and run to £14,000 depending on size and specification. Opening up a 3.5 m load-bearing wall between kitchen and dining room in a semi: around £4,500–£6,800.

Guide prices for knock-through walls
Option	Guide price	Good to know
Non-load-bearing wall removed	£1,200 – £2,800	No steel, mostly making good
Load-bearing wall with steel beam (up to about 4 m)	£3,800 – £7,500	The usual kitchen-diner or through-lounge
Wide span, chimney breast or multiple steels	£7,500 – £14,000	Bigger steels, more propping and making good

Guide ranges include VAT where it applies. A free survey turns this guide into a fixed, itemised price.

Knock-through walls in Staffordshire: common questions

How long does a knock-through take?

Most take 1–2 weeks on site. The steel usually takes one to two weeks to make after the engineer's calculations are approved, so allow three to five weeks from instruction to finished walls. The wall removal and steel installation themselves typically take two to four days; plastering, drying and refitting sockets take up the rest.

How do I book a survey in Staffordshire?

Send the form on this page, use the guide-price tool or call 0800 088 6248 free. We'll ask a few questions about your knock-through and arrange a time to visit.

Will I get a certificate for the steel beam?

Yes. When building control is satisfied, it issues a completion certificate for the work, and you should keep that with the structural engineer's calculations. A buyer's solicitor will ask for both when you sell, as unapproved wall removals are a common problem in house sales. Steel and other products carry their manufacturers' terms, which are set out in your quote.

Who approves knock-through walls in Staffordshire?

Not for planning — internal work isn't development unless the house is listed. Building Regulations approval is needed for structural work such as removing a load-bearing wall, through the district or borough council for your town or a registered building control approver.

Knock-through walls across Staffordshire

Choose your town for local details and postcodes:

Also covering nearby

More services in Staffordshire

Use our guide-price tool for a knock-through in Staffordshire, then get a fixed price for the agreed specification after the survey.