What should you know before starting in Stourbridge?
There's no planning application for internal work in Stourbridge, but Building Regulations still apply to structural changes, electrics, drainage and fire safety. We tell you at the survey which parts need approval or certification.
- Textured ceilings applied before 2000 should be tested for asbestos before they're cut or disturbed.
- Keeping a short section of wall at each end can mean a smaller steel and a lower cost.
- Internal alterations to a listed building need listed building consent from Dudley Council.
- Postcode district
- DY8
- Planning and building control
- Dudley Council
- From our West Bromwich base
- 8 miles
Options to consider in Stourbridge
Load-bearing wall with a steel beam
Where the wall supports floors, other walls or the roof, a structural engineer sizes a steel beam and the padstones that carry its ends. Temporary props hold everything up while the wall is removed and the beam goes in. The steel is then boxed in with plasterboard, usually fire-rated, and skimmed so it looks like part of the ceiling.
Wide opening instead of full removal
Keeping short sections of wall at each end, or a bulkhead above, lets you open two rooms up while keeping some separation and somewhere to put furniture. It can mean a shorter, lighter steel, and it sometimes gives a better result where the two floors are at slightly different levels or the ceilings don't line up.
Knock-through walls prices in Stourbridge
For a home in Stourbridge, our guide range is £1,200–£14,000 depending on size and specification. Opening up a 3.5 m load-bearing wall between kitchen and dining room in a semi: usually £4,500–£6,800.
| Option | Guide price | Good to know |
|---|---|---|
| Non-load-bearing wall removed | £1,200 – £2,800 | No steel, mostly making good |
| Load-bearing wall with steel beam (up to about 4 m) | £3,800 – £7,500 | The usual kitchen-diner or through-lounge |
| Wide span, chimney breast or multiple steels | £7,500 – £14,000 | Bigger steels, more propping and making good |
Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Stourbridge address.
Your questions answered
How long does a knock-through take?
Most take 1–2 weeks on site. The steel usually takes one to two weeks to make after the engineer's calculations are approved, so allow three to five weeks from instruction to finished walls. The wall removal and steel installation themselves typically take two to four days; plastering, drying and refitting sockets take up the rest.
Do you cover Stourbridge?
Yes. Stourbridge (DY8) is about 8 miles from our West Bromwich base and inside the area we cover. Call 0800 088 6248 or send the form on this page to book a free survey.
Should I do the knock-through before a new kitchen?
Yes, the structural work comes first, but plan both together. Knowing the kitchen layout tells us where the steel can sit, where lights and sockets should go, and whether radiators need to move. Doing the wall and kitchen as one project avoids re-plastering twice and means the floor can run through in one go.
Who approves knock-through walls in Stourbridge?
Not for planning — internal work isn't development unless the house is listed. Building Regulations approval is needed for structural work such as removing a load-bearing wall, through Dudley Council or a registered building control approver.
Knock-through walls near Stourbridge
- Knock-through walls in Amblecote
- Knock-through walls in Wollaston
- Knock-through walls in Lye
- Knock-through walls in Wordsley
Other work we do in Stourbridge
- House renovations in Stourbridge
- Double-storey extensions in Stourbridge
- Loft conversions in Stourbridge
- Composite doors in Stourbridge
- Painting and decorating in Stourbridge
- Flat roofing in Stourbridge
Book a free visit in Stourbridge and we'll tell you whether your wall is likely to need steel before you commit to anything.
