Rendering in Walmley

Before your render in Walmley

This kind of work rarely needs planning permission, but it does have to comply with Building Regulations, and some parts must be certified by a registered installer or signed off by building control. In Walmley, building control is provided by Birmingham City Council or a registered building control approver (formerly an approved inspector).

New render should stop above the damp-proof course with a bell-cast bead.
Hard cement render on old solid walls can trap moisture inside.
Downpipes, lights and satellite dishes on Walmley homes are removed and refitted around the new render.

Postcode district: B76
Planning and building control: Birmingham City Council
From our West Bromwich base: 9 miles

Which option fits your home?

Through-coloured render (K Rend type)

Single-coat or two-coat renders coloured through their whole depth, sprayed or trowelled and then scraped to a textured finish. Brands such as K Rend are widely used on new and existing homes. They don't need painting and hide small marks well, though they're best on walls with consistent backgrounds.

Render repairs

Cutting out hollow, cracked or blown render, treating any cause such as a leaking gutter or failed bead, and patching to match. Exact colour and texture matches are hard on painted or weathered render, so a repaired wall may need repainting or a full re-coat to look even. We'll be honest about whether a patch will blend.

Rendering prices in Walmley

For a home in Walmley, our guide range is £40–£160 per m². Silicone render with base coat and mesh over sound brickwork, including beads: usually £70–£100 per m².

Guide prices for rendering
Option	Guide price	Good to know
Sand and cement, painted	£40 – £65 per m²	Two-coat render plus masonry paint
Silicone or through-coloured render	£65 – £100 per m²	No painting, low maintenance
Insulated render (EWI)	£110 – £160 per m²	Insulation boards with a render finish

Guide ranges include VAT where it applies. Access, parking and the state of what's there now can move the price — the survey settles it.

Questions about rendering in Walmley

How much does it cost to render a house?

In the West Midlands, rendering typically costs around £40–£65 per m² for painted sand and cement and £65–£100 per m² for silicone or through-coloured render, plus scaffolding. For a three-bed semi with roughly 90–120 m² of wall, that usually means around £6,000–£12,000 for the render, with scaffolding on top. Removing old render or adding insulation increases the cost.

Which postcodes in Walmley do you work in?

We cover B76 and the streets around them. If you're on the edge of Walmley, neighbouring Erdington and Castle Vale are covered too.

Do I need to repaint render?

Sand and cement render needs painting with masonry paint, and repainting every several years. Silicone and through-coloured renders don't need painting, because the colour runs through the material. They may need an occasional gentle clean, especially on north-facing or shaded walls where algae can grow.

Who approves rendering in Walmley?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Walmley is provided by Birmingham City Council or a registered building control approver, and some work is self-certified by registered installers.

Rendering near Walmley

Other home improvements in Walmley

We'll tap-test your walls and set out the options in writing after a free rendering survey in Walmley.