Rendering in Wollaston

Planning your render in Wollaston

This kind of work rarely needs planning permission, but it does have to comply with Building Regulations, and some parts must be certified by a registered installer or signed off by building control. In Wollaston, building control is provided by Dudley Council or a registered building control approver (formerly an approved inspector).

Downpipes, lights and satellite dishes on Wollaston homes are removed and refitted around the new render.
New render should stop above the damp-proof course with a bell-cast bead.
Hollow or loose render has to come off before a new system goes on.

Postcode district: DY8
Planning and building control: Dudley Council
From our West Bromwich base: 9 miles

Options to consider in Wollaston

Render repairs

Cutting out hollow, cracked or blown render, treating any cause such as a leaking gutter or failed bead, and patching to match. Exact colour and texture matches are hard on painted or weathered render, so a repaired wall may need repainting or a full re-coat to look even. We'll be honest about whether a patch will blend.

Through-coloured render (K Rend type)

Single-coat or two-coat renders coloured through their whole depth, sprayed or trowelled and then scraped to a textured finish. Brands such as K Rend are widely used on new and existing homes. They don't need painting and hide small marks well, though they're best on walls with consistent backgrounds.

Rendering prices in Wollaston

Guide prices start at £40 and run to £160 per m². Silicone render with base coat and mesh over sound brickwork, including beads: around £70–£100 per m².

Guide prices for rendering
Option	Guide price	Good to know
Sand and cement, painted	£40 – £65 per m²	Two-coat render plus masonry paint
Silicone or through-coloured render	£65 – £100 per m²	No painting, low maintenance
Insulated render (EWI)	£110 – £160 per m²	Insulation boards with a render finish

Guide ranges include VAT where it applies. A free survey turns this guide into a fixed, itemised price.

Rendering in Wollaston: common questions

How long does rendering take?

A typical semi takes one to three weeks, depending on how much old render comes off, the system and the weather. Each coat needs time to cure, and render can't be applied in frost, heavy rain or very hot sun. We plan the programme around the forecast and tell you about any delays.

Which postcodes in Wollaston do you work in?

We cover DY8 and the streets around them. If you're on the edge of Wollaston, neighbouring Stourbridge and Amblecote are covered too.

Do I need to repaint render?

Sand and cement render needs painting with masonry paint, and repainting every several years. Silicone and through-coloured renders don't need painting, because the colour runs through the material. They may need an occasional gentle clean, especially on north-facing or shaded walls where algae can grow.

Who approves rendering in Wollaston?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Wollaston is provided by Dudley Council or a registered building control approver, and some work is self-certified by registered installers.

Close to Wollaston

Other work we do in Wollaston

Colour samples look different on your own walls, so call 0800 088 6248 and we'll bring them to Wollaston.