Wet rooms in Bilston

Planning your wet room in Bilston

Live in a conservation area or a listed building in Bilston? Check with City of Wolverhampton Council before changing the outside of your home. Otherwise the main rules for your wet room are Building Regulations, and we'll explain at the survey which certificates you'll receive.

Fixing backing boards behind the tiles now makes adding grab rails later much easier.
A wet room's whole floor and the walls around the shower are covered with a waterproof membrane before tiling.
Floor tiles in a wet room should have a slip-resistance rating suitable for wet, barefoot use.

Postcode district: WV14
Planning and building control: City of Wolverhampton Council
From our West Bromwich base: 4 miles

Which option fits your home?

Level-access walk-in shower

Instead of falling across the whole room, a sloped former is set flush into the floor only in the shower area, with the rest of the floor flat. It gives step-free access at a slightly lower cost. The surrounding floor and walls are still waterproofed, because water rarely stays exactly where it's meant to.

Accessible wet room

Designed for wheelchair users or people with limited mobility: a wider door if needed, grab rails fixed into reinforced walls, a fold-down seat, a thermostatic shower, a comfort-height toilet and lever taps. Work like this can sometimes be funded by a council Disabled Facilities Grant, and it may qualify for VAT relief.

What does your wet room cost in Bilston?

Guide prices start at £5,000 and run to £15,000 depending on size and specification. Converting a 2 m × 2.5 m bathroom into a fully tanked wet room with a level-access floor: around £6,800–£9,000.

Guide prices for wet rooms
Option	Guide price	Good to know
Level-access walk-in shower in an existing bathroom	£5,000 – £7,000	Former in the shower area only
Full wet room, fully tanked	£6,500 – £9,500	Suits a standard-size bathroom
Accessible or larger wet room	£9,000 – £15,000	Rails, seat, wider door, underfloor heating

Guide ranges include VAT where it applies. We confirm a fixed price for the agreed specification after visiting.

Wet rooms in Bilston: common questions

What should I do before a wet room is fitted?

If funding is involved, get the council's approval in writing before we start. Clear the bathroom, and plan where you'll wash for a couple of weeks if it's your only shower. Think about who will use the room in future, as adding wall reinforcement for rails now costs far less than retrofitting later. Tell us about any mobility equipment that needs space.

Do you cover Bilston?

Yes. Bilston (WV14) is about 4 miles from our West Bromwich base and inside the area we cover. Call 0800 088 6248 or send the form on this page to book a free survey.

How much does a wet room cost?

In the West Midlands, wet rooms typically cost £5,000–£15,000, including VAT where it applies. Converting a 2 m × 2.5 m bathroom into a fully tanked wet room with a level-access floor usually costs £6,800–£9,000. Accessible wet rooms with rails, a seat and a wider door, or larger rooms with underfloor heating, sit at the upper end of the range.

Who approves wet rooms in Bilston?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Bilston is provided by City of Wolverhampton Council or a registered building control approver, and some work is self-certified by registered installers.

Also covering nearby

Other home improvements in Bilston

Book a free wet room survey in Bilston, and we'll check the floor and drainage before recommending a layout.