Wet rooms in Hamstead

What should you know before starting in Hamstead?

Work like this in Hamstead rarely needs planning permission, but parts of the job must meet Building Regulations — certified electrical work, ventilation or energy-efficiency standards, for example. Your quote shows how each part is signed off. If planning does come into it, say for a listed building, Sandwell Council is the authority.

A wet room's whole floor and the walls around the shower are covered with a waterproof membrane before tiling.
Starting work before the council approves a Disabled Facilities Grant can mean losing the grant entirely.
Building work to adapt a bathroom for a disabled person can be zero-rated for VAT where VAT applies.

Postcode district: B43
Planning and building control: Sandwell Council
From our West Bromwich base: 3 miles

Options to consider in Hamstead

Ground floor on concrete

The existing screed is cut out where the shower sits so the former can be recessed level with the floor, and the waste is connected below the slab. It's dustier work but very solid once complete. Older concrete floors without a damp-proof membrane need extra care before tanking.

Level-access walk-in shower

Instead of falling across the whole room, a sloped former is set flush into the floor only in the shower area, with the rest of the floor flat. It gives step-free access at a slightly lower cost. The surrounding floor and walls are still waterproofed, because water rarely stays exactly where it's meant to.

How much should you budget in Hamstead?

For a home in Hamstead, our guide range is £5,000–£15,000 depending on size and specification. Converting a 2 m × 2.5 m bathroom into a fully tanked wet room with a level-access floor: usually £6,800–£9,000.

Guide prices for wet rooms
Option	Guide price	Good to know
Level-access walk-in shower in an existing bathroom	£5,000 – £7,000	Former in the shower area only
Full wet room, fully tanked	£6,500 – £9,500	Suits a standard-size bathroom
Accessible or larger wet room	£9,000 – £15,000	Rails, seat, wider door, underfloor heating

Guide ranges include VAT where it applies. Your fixed price for the agreed specification follows a free survey at your Hamstead address.

Your questions answered

How long does it take to build a wet room?

Most take 8–14 working days. Floor preparation and tanking take longer than in a standard bathroom, and the membrane needs time to cure before tiling. Timber floors upstairs often need new plywood and joist work first. If it's your only bathroom, we'll plan the toilet to be usable at night for as much of the job as possible.

How do I book a survey in Hamstead?

Send the form on this page, use the guide-price tool or call 0800 088 6248 free. We'll ask a few questions about your wet room and arrange a time to visit.

Can a wet room be fitted upstairs?

Yes. On timber floors, we lift the boards, check and strengthen the joists if needed, lay structural plywood and set a shower former between the joists. The waste route needs care, because it must fall to the soil stack without cutting joists beyond safe limits. If that's not possible, a pumped shower drain can be used.

Will I need permission from the council in Hamstead?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Hamstead is provided by Sandwell Council or a registered building control approver, and some work is self-certified by registered installers.

Nearby places we cover

Other home improvements in Hamstead

Call 0800 088 6248 to talk through a wet room, including any grant paperwork you need a quote for.