What should you know before starting in Malvern?
Live in a conservation area or a listed building in Malvern? Check with Malvern Hills District Council before changing the outside of your home. Otherwise the main rules for your wet room are Building Regulations, and we'll explain at the survey which certificates you'll receive.
- Extract fans in a bathroom without an openable window should run on for around 15 minutes after use.
- A wet room's whole floor and the walls around the shower are covered with a waterproof membrane before tiling.
- Building work to adapt a bathroom for a disabled person can be zero-rated for VAT where VAT applies.
- Postcode district
- WR14
- Planning and building control
- Malvern Hills District Council
- From our West Bromwich base
- 31 miles
Which option fits your home?
Upstairs on a timber floor
The floorboards are replaced with structural plywood, and joists are checked and sometimes strengthened. A preformed tray former is set between the joists to create the fall, and the waste must run with the joists or through them within safe limits. If the route is too long, a pumped shower drain may be used.
Full wet room
The entire floor is tanked and falls gently to a single drain, often a linear channel near the wall. It's the most open, step-free layout and the easiest to clean. A fixed glass screen keeps spray off the toilet and basin, and the floor tiles need good slip resistance when wet.
Guide prices for Malvern
Expect to budget between £5,000 and £15,000 depending on size and specification in Malvern. Converting a 2 m × 2.5 m bathroom into a fully tanked wet room with a level-access floor: typically £6,800–£9,000.
| Option | Guide price | Good to know |
|---|---|---|
| Level-access walk-in shower in an existing bathroom | £5,000 – £7,000 | Former in the shower area only |
| Full wet room, fully tanked | £6,500 – £9,500 | Suits a standard-size bathroom |
| Accessible or larger wet room | £9,000 – £15,000 | Rails, seat, wider door, underfloor heating |
Guide ranges include VAT where it applies. Access, parking and the state of what's there now can move the price — the survey settles it.
Your questions answered
Are wet room floors slippery?
They don't have to be. We use floor tiles with a slip-resistance rating suited to wet barefoot areas, and smaller tiles in the shower zone give more grout lines for grip and follow the falls better. A fixed screen keeps most spray in the shower area. Grab rails and a seat add security for anyone unsteady on their feet.
How do I book a survey in Malvern?
Send the form on this page, use the guide-price tool or call 0800 088 6248 free. We'll ask a few questions about your wet room and arrange a time to visit.
How long does it take to build a wet room?
Most take 8–14 working days. Floor preparation and tanking take longer than in a standard bathroom, and the membrane needs time to cure before tiling. Timber floors upstairs often need new plywood and joist work first. If it's your only bathroom, we'll plan the toilet to be usable at night for as much of the job as possible.
Does Malvern Hills District Council need to approve my wet room?
You won't usually need planning permission, but the work must meet Building Regulations. Building control in Malvern is provided by Malvern Hills District Council or a registered building control approver, and some work is self-certified by registered installers.
Also covering nearby
- Wet rooms in Worcester
- Wet rooms in Droitwich Spa
- Wet rooms in Stourport-on-Severn
- Wet rooms in Bewdley
More services in Malvern
- Kitchen makeovers in Malvern
- Kitchen fitting in Malvern
- En-suite bathrooms in Malvern
- Rendering in Malvern
- House renovations in Malvern
- Fascias, soffits and guttering in Malvern
Tell us who'll be using the room and how, and we'll design around that, with no obligation.