Rendering in Kinver

Before your render in Kinver

This kind of work rarely needs planning permission, but it does have to comply with Building Regulations, and some parts must be certified by a registered installer or signed off by building control. In Kinver, building control is provided by South Staffordshire Council or a registered building control approver (formerly an approved inspector).

Silicone and through-coloured renders don't need painting.
Re-rendering more than 50% of a wall can trigger a requirement to improve its insulation.
Downpipes, lights and satellite dishes on Kinver homes are removed and refitted around the new render.

Postcode district: DY7
Planning and building control: South Staffordshire Council
From our West Bromwich base: 10 miles

Which option fits your home?

Render repairs

Cutting out hollow, cracked or blown render, treating any cause such as a leaking gutter or failed bead, and patching to match. Exact colour and texture matches are hard on painted or weathered render, so a repaired wall may need repainting or a full re-coat to look even. We'll be honest about whether a patch will blend.

Silicone render

A thin-coat render applied over a base coat and mesh, with silicone added so rain beads off and dirt washes away. Silicone render is through-coloured, so it needs no painting, flexes slightly with the wall and lets moisture escape. It costs more than sand and cement but needs far less upkeep.

Guide prices for Kinver

Expect to budget between £40 and £160 per m² in Kinver. Silicone render with base coat and mesh over sound brickwork, including beads: typically £70–£100 per m².

Guide prices for rendering
Option	Guide price	Good to know
Sand and cement, painted	£40 – £65 per m²	Two-coat render plus masonry paint
Silicone or through-coloured render	£65 – £100 per m²	No painting, low maintenance
Insulated render (EWI)	£110 – £160 per m²	Insulation boards with a render finish

Guide ranges include VAT where it applies. We confirm a fixed price for the agreed specification after visiting.

Rendering in Kinver: common questions

Do I need to repaint render?

Sand and cement render needs painting with masonry paint, and repainting every several years. Silicone and through-coloured renders don't need painting, because the colour runs through the material. They may need an occasional gentle clean, especially on north-facing or shaded walls where algae can grow.

Which postcodes in Kinver do you work in?

We cover DY7 and the streets around them. If you're on the edge of Kinver, neighbouring Wollaston and Wordsley are covered too.

How much does it cost to render a house?

In the West Midlands, rendering typically costs around £40–£65 per m² for painted sand and cement and £65–£100 per m² for silicone or through-coloured render, plus scaffolding. For a three-bed semi with roughly 90–120 m² of wall, that usually means around £6,000–£12,000 for the render, with scaffolding on top. Removing old render or adding insulation increases the cost.

Will I need permission from the council in Kinver?

You won't usually need planning permission, but the work must meet Building Regulations. Building control in Kinver is provided by South Staffordshire Council or a registered building control approver, and some work is self-certified by registered installers.

Also covering nearby

Other work we do in Kinver

We'll tap-test your walls and set out the options in writing after a free rendering survey in Kinver.